Mr. Steam W228C PC Guía de instalación descargar pdf (Pagina 6)

steam

Broadway Collection Towel Warmers Installation, Operation & Maintenance Instructions

_______________________________________________________________

ELECTRICAL CONNECTIONS

TO PREVENT SHOCK HAZARD,

THE ELECTRICITY MUST BE TURNED OFF AT THE

MAIN PANEL BEFORE ANY WIRING IS ATTEMPTED.

The towel warmer is an electric device.

It must be installed by a licensed electrician in accordance

with the National Electrical Code (NEC) and local code.

Installation of a wall switch or timer to turn

the towel warmer on and off is required.

NOTE: When the towel warmer is energized (ON), the indi-

cator light on the towel warmer will illuminate.

NOTE: The Towel Warmer wires are color coded: BLACK

for LINE, WHITE for NEUTRAL, GREEN/YELLOW for

EQUIPMENT GROUND.

IMPORTANT NOTE: Some towel warmers have a ground

lug inside the wiring box. Secure the ground wire from the

house wiring to the ground lug using the provided nut.

• Install Towel Warmers in upright position only. Locate with

wiring box and pilot light on bottom as shown on pages

4 & 5. Failure to install properly may result in overheating

and a hazardous condition.

• All wiring must conform to National Electrical Code

(NEC) and local code.

• Do Not alter or modify any Mr.Steam products. Doing so

may result in an inoperable or hazardous installation and

will void the warranty.

WARNING

CAUTION

Wiring Box

Set Screw(s)

Wiring Box

Field

Wires

Wiring Box

Escutcheon

Wiring Box

Escutcheon

BX Connector

Lock Nut

BX Cable*

(or greenfield)

Wires from

wiring box

1. Assemble the BX cable connector

to the wiring box escutcheon as

shown.

NOTE: NM (non-metallic) cable,

if permitted by National and

Local Codes, may be used instead

of BX cable

2. Secure wiring box escutcheon to

the wall with screws provided.

(Use longer screws as required by

construction conditions.)

3. Connect wiring per instructions.

4. Slide the wiring box into the wir-

ing box escutcheon and tighten

the set screw firmly. Secure the

upper and lower brackets per the

instructions on page 5.

INSTRUCTIONS FOR INSTALLING A BROADWAY COLLECTION TOWEL WARMER

WITH A JUNCTION BOX.

A wall plate is required to complete this installation.

Available wall plates: Polished Chrome 104093PC Oil Rubbed Bronze 104093ORB White 104093WH

Field

Wires

Wires from

Wiring Box

Wiring

Box Set

Screw

Wiring

Box

Wiring Box

Escutcheon

Wall

Plate

Screws

1. Assemble the bushing

to the wall plate and

wiring box escutcheon

as shown.

2. Secure the assembly

to the junction box

using the screws

provided with the

wall plate.

3. Connect wires

per instructions

4. Slide the wiring box into the

wiring box escutcheon and

tighten the set screw firmly.

Secure the upper and lower

brackets per the instructions

on page 5.

1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios

Mr. Steam W228C PC Guía de instalación Pagina 6

Comentarios a estos manuales