Mr. Steam 90C1ATSQPC Guía de instalación Pagina 30

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 46
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 29
mr
.
steam
®
Installation & Operating Instructions
______________________________________________________________
6
DIAGRAM 2
Installation Instructions for Round &
Square iTempo
and iTempoPlus
STEP 1
Determine the desired installation location of the control.
The iTempo
and iTempoPlus
controls are designed to be
installed inside or outside the steam room as a matter of
personal preference. If the control is installed outside the steam
room a Remote Temperature Probe part number MSTS must be
installed inside the steam room. If the control is installed inside
the steam room the control must be located:
• 4-5 feet above the oor near the bather seating area.
• The control features an integral temperature sensor. Locate
the control in a location representative of the desired steam
bathing temperatures. Do not locate the control above or
near the steam head or direct steam emissions. Locating the
controls near the steamhead or near direct steam emissions
may result in poor steam room temperature control.
• On a vertical wall
• The control cable length is 30 feet. Insure that the control
and/or steam generator are located accordingly. Contact a
Mr.Steam technical service representative if a longer cable is
required (60 ft. cable, PN 103990-60).
IMPORTANT NOTE:
See installation instructions for the
MSTS Temperature Probe before rough-in or installation of
control (pgs. 8-9).
STEP 2
Diagram 1
Make a 2-
5
8” wide by 3-
7
8” high cutout in the desired control
location. Do not oversize or under size the cutout.
STEP 3
Diagram 2
Route the control cable (provided with the control) from the wall
cutout to the steam generator. Connect one end of the cable to
the steam generator connector.
Drawings for Illustrative Purposes Only.
2-
5
8”
3-
7
8”
DIAGRAM 1
Vista de pagina 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 45 46

Comentarios a estos manuales

Sin comentarios